You can only be in a position to solve advanced engineering problems if you have PhD training in engineering. To be admitted as a doctoral student, one must hold a masters degree in the Engineering or related subject and pass a comprehensive entrance exam.
By its nature, the DCI is multidisciplinary in scope, covering four areas of knowledge (biotechnology, mechatronics, industrial engineering and environmental systems) tha
By its nature, the DCI is multidisciplinary in scope, covering four areas of knowledge (biotechnology, mechatronics, industrial engineering and environmental systems) that have been selected from the research with greater strength within the Division of Engineering and Architecture. These areas interact with each other through projects, research centers and chairs knowledge areas serve as a crucible for the definition of the research DCI program:
Mechatronics as a priority for scientific and technological development of Mexico areas, mechatronics includes analysis and synthesis of complex systems where multiple disciplines interact. The DCI program in mechatronics specialty, responds to the need to train human resources research with a high level of preparation in the disciplines of automation, mechanics and electronics.
Industrial Engineering increased global competitiveness is one of the biggest challenges of every nation, particularly its institutions and companies, which will face a continuous process of increasing productivity, efficient use of resources and generation courage to face increasing competition. Research at the frontier of knowledge in industrial engineering contributes to the research, development and implementation of new ways to operate and improve the operational and administrative processes, mainly by developing new and innovative models of decision-making.
Environmental systems: evolution in approaches to operation, from treatments to control pollution to the concept of corporate social responsibility, indicating the relevance within the economic and social spheres has the best use of natural resources, care environmental and health protection of the population, which is encompassed in the term: sustainable development.
The George Washington University - School of Engineering & Applied Science
Offered through the Department of Engineering Management and Systems Engineering (EMSE), the M.S., Ph.D., and certificate programs in Engineering Management are designed
Offered through the Department of Engineering Management and Systems Engineering (EMSE), the M.S., Ph.D., and certificate programs in Engineering Management are designed to prepare technical managers who need a broad education in order to keep an organization operating efficiently and working ahead of its competitors. The Engineering Management program provides a graduate education in the latest management techniques for technical and scientific organizations.
Doctor of Philosophy in Engineering Management (Ph.D.)
Credit hours (for those with a master's degree): 30
Credit hours (for those without a master's degree): 54
Duration: 4-6 years
Math 1231 Single Variable Calculus I
Math 1232 Single Variable Calculus II
APSC 3115 Engineering Analysis III
The Doctor of Philosophy in Engineering (Ph.D. in Engineering) degree is awarded to candidates who successfully complete the taught courses and research components of the
Khalifa University of Science and Technology offers Graduate Research/Teaching Assistant (GRTA) scholarships to support qualified international students enrolled in graduate programs.
The scholarship provides generous remuneration and benefits that include:
Full coverage of tuition fees.
Medical insurance coverage for students under the Khalifa University visa.
Support to attend international research conferences.
The indicative monthly stipend for GRTA Scholarship is as follows (subject to change):
We will start taking applications starting November 1st, 2018 for the next intake in September 1st, 2019.
The Doctor of Philosophy in Engineering (Ph.D. in Engineering) degree is awarded to candidates who successfully complete the taught courses and research components of the program. The students are required to complete a program of advanced courses in engineering. They are also required to carry out an independent investigation of a specialized area in engineering. Candidates for this degree are supervised by experienced researchers and are expected to demonstrate initiative in their approach and innovation in their work. The Ph.D. Candidates prepare and present a thesis on their chosen area. Research may be undertaken in a variety of topics corresponding to the areas of focus identified by the University....
By choosing courses with the guidance of his or her supervisor, each student can adjust the programme to his or her research interests.
C A L L
for admission of students to postgraduate university (doctoral) study programmes for acquiring the academic degree of Doctor of Philosophy in the field of Engineering Sciences in the academic year 2019/20:
In the subjects of Mechanical Engineering, Naval Architecture, Basic Engineering Sciences and Interdisciplinary Engineering Sciences for the modules
Thermal Power Engineering
Design and Building of Ships
Mechanical Engineering Design
Quality Assurance and Engineering System Control
The number of students accepted: 30.
By choosing courses with the guidance of his or her supervisor, each student can adjust the programme to his or her research interests....
This multidisciplinary program builds on the fundamentals of traditional engineering and science combined with curriculum and research activities addressing the numerous
Ph. D. in Microsystems Engineering
RIT offers a unique program leading to a doctorate degree in microsystems engineering. This multidisciplinary program builds on the fundamentals of traditional engineering and science combined with curriculum and research activities addressing the numerous technical challenges of micro- and nano-systems. These include the manipulation of electrical, photonic, optical, mechanical, chemical, and biological functionality to process, sense, and interface with the world at a nanometer scale. The goal of the program is to provide a foundation to explore future technology through research in nano-engineering, design methods, and technologies and their integration into micro- and nano-scaled systems. Some of the program’s areas of exploration include the following:...
The PhD program in Engineering through the promotion of research and the training of researchers focuses its mission on the integral education of its students that, in ad
The PhD program in Engineering through the promotion of research and the training of researchers focuses its mission on the integral education of its students that, in addition to having academic excellence, enhance interdisciplinary work and contribute to solving major national and global problems. The nucleus of professional, disciplinary and interdisciplinary knowledge of this academic program is that of engineering and particularly, that which is found in the field of systems and processes associated with the lines and areas of knowledge related to the research groups of the Faculty of Engineering of the Pontificia Universidad Javeriana .
General informationAwarding title: Doctor of EngineeringFace-to-face modalitySNIES: 53804Estimated duration: 4 yearsQualified registry resolution: 5868 of May 4, 2015, valid until May 4, 2022.Registration fee: $ 15,039,000 / Semester *Type of training: PostgraduatePlace where it is offered: Bogotá DCHigh Quality accreditation resolution: 09417 of June 8, 2018, granted for six yearsDay: Day, full time....
An interdisciplinary program on the physical and chemical fundamentals of material synthesis, characterization, structure-property behavior, processing and computational
PhD in Material Science and Engineering
An interdisciplinary program on the physical and chemical fundamentals of material synthesis, characterization, structure-property behavior, processing, and computational modeling; with emphasis on practical laboratory experience.
Research areas of interest:
Photonics & laser materials
Polymeric materials & composites
Fuel cells & hydrogen storage materials
Processing & device applications
Protein biochemistry & biotechnology
Micro-optics & micro-nano system technologies
Items listed below are only for applicant's information.
Personal and Educational Background Information (CV)
3 Recommendation Letters
TOEFL or UDS&KPDS Requirement (for those whose native language is not English) New Internet-Based: Minimum Score 80Computer Based: Minimum Score 213Paper Based: Minimum Score 550UDS / KPDS: 87
ALES scores (required for all Turkish nationals)
GRE scores (required from foreign students; optional for Turkish students)
Official transcripts from all the universities attended
Statement of Purpose
Areas of Interest
Candidates pursuing the Ph.D. in Engineering must develop an independent thinking approach and a unique expertise in their own research interest. Independent research req
Candidates pursuing the Ph.D. in Engineering must develop an independent thinking approach and a unique expertise in their own research interest. Independent research requires diligent and thorough investigation into a topic with the aim of formulating new and original ideas, findings and theories.
All Doctor of Philosophy students are required to attend the Scientific Research Practices and Entrepreneurship modules in their first year of candidature.
Taylor's School of Engineering specializes in Chemical Engineering, Electrical & Electronic Engineering, and Mechanical Engineering. We offer a well-established curriculum, backed by a highly qualified team of academics, who possess multidisciplinary research strengths in the following fields:...
The University of Nottingham - Faculty of Engineering
Manufacturing engineering involves the research and development of systems, processes, machines, tools, and equipment. Projects areas can cover many different fields with
Manufacturing engineering involves the research and development of systems, processes, machines, tools, and equipment. Projects areas can cover many different fields within this discipline, for example, design, manufacturing, assembly, measurement, testing, and modeling.
This Ph.D. is based within the Faculty of Engineering. The research work within the faculty spans a range of applications including medicine, aerospace and automotive engineering, energy and the construction industry and it includes work from the most fundamental studies up to near-commercial investigations.
This course requires a 2:1 or international equivalent and/or a master at merit level or above in a relevant subject, and an IELTS level 6.0 (5.5 in each element). It is usually completed over a period of three years but is also available over four years....
The discipline Management Science and Engineering is one of the disciplines at the first-level in the Management Discipline Group according to the Chinese Discipline Clas
Management Science and Engineering (120100)
The discipline Management Science and Engineering is one of the disciplines at the first-level in the Management Discipline Group according to the Chinese Discipline Classification. The theoretical and knowledge foundation of this discipline is formed by combining management, economics, mathematics, systems science, information science and so on. By comprehensive applications of these scientific principles and methodologies, it aims at analyzing and solving various management related problems in society, economy, enterprises and other institutions through both qualitative and quantitative methods, with quantitative research as the more important aspect. The main research tasks of this discipline are to provide enterprises and other organizations with systematic theory foundations, methodological models, and information systems so as to support their decisions in relation to the business, operation, management as well as project evaluation and management. As the earliest founded discipline and one of the fastest developed disciplines in the Management Discipline Group, the discipline Management Science and Engineering has formed more completed theoretical system base, with distinguished characters in more emphasizing scientific methodology and models, a closer connection to engineering areas and more attention to practical applications....
King Abdullah University of Science and Technology
The program is rich with opportunities, for both M.S. and Ph.D. students, with a focus on modern computational and advanced data-analysis methods to study geophysical pro
ABOUT THE PROGRAM
The program is rich with opportunities, for both M.S. and Ph.D. students, with a focus on modern computational and advanced data-analysis methods to study geophysical problems associated with atmospheric processes and ocean circulation, oil exploration and reservoir modeling, earthquake processes and crustal deformation. Students in this program receive broad training in numerical methods, mathematical modeling, and geophysics. M.S. students have an option to participate in scientific research activities that include computational and mathematical modeling or field-study projects (M.S. with thesis). Ph.D. candidates in the program conduct original research.
We invite you to explore our website to find out more about our graduate study programs and research groups....
Asia Pacific University of Technology & Innovation (APU)
Why our APU Ph.D. by Research Programme? You will be assigned to a group of highly qualified supervisors; Wide range of latest research areas in the fields of computing a
Why our APU Ph.D. by Research Programme?
You will be assigned to a group of highly qualified supervisors.
A wide range of latest research areas in the fields of computing and business administration areas.
We have our regular research workshops, colloquium, and seminars facilitated by local and international academicians and professionals.
Comprehensive Student Support Services.
Resourceful online databases.
Duration:Full-time (3-5 years)Part-time ( 5-7 years)
Course Fees:RM 45,000 (USD 10,720)
Ideally, students work with potential supervisors to develop a proposal.
*Supervisory sessions consist of 4 elements as appropriate to the candidate’s background:...
The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialized university education of the highest level in
Physical and Material Engineering
Guarantor of the programme: prof. RNDr. Miroslav Liška, DrSc.
Academic year: 2017/18
Type of study: full-time
Language of instructions: English
Standard length of study: 4 years
Qualification awarded: Ph.D.
Educational and professional goals
The goal of the doctoral study programme is to provide outstanding graduates from the MSc study programme with a specialized university education of the highest level in certain fields of physical technologies, materials engineering and interdisciplinary parts. The education obtained within this study programme also comprises a training and attestation for scientific work.
Admission requirements and access to further studies
Botswana International University Of Science And Technology
This program aims at providing, through research, the specialisation in the concepts and modern methods of Mineral Exploration, Geotechnical Engineering, Mineralogy, Petr
This program aims at providing, through research, the specialisation in the concepts and modern methods of Mineral Exploration, Geotechnical Engineering, Mineralogy, Petrology and Geochemistry, Economic Geology and Hydrogeology.
General Objective: To train personnel of the highest academic and professional level in chemical engineering and their related fields, capable of carrying out research to
PhD Programs in Engineering.
Name of the program: Doctorate in Engineering Sciences: Chemical Engineering DGP key: 501602 Normal period to graduate: 8 semesters Credits: 200 Degree conferring: Doctor of Science
Campus where it is offered: Hermosillo
Program descriptionGeneral purpose
To train personnel of the highest academic and professional level in chemical engineering and their related fields, capable of carrying out research to generate new knowledge or technological developments that contribute to the solution of problems of national interest.
Specific objectivesEstablish an adequate academic and infrastructure framework for engineering education.Generate research projects for the development of basic knowledge and its applications.Generate projects of innovative application of knowledge and technological development.Actively participate in the dissemination of scientific and technological knowledge of chemical engineering.Promote the link with the regional and national industry.Promote quality professional practice in engineering and related fields.What Will Your Competencies Be When You Finish The Program?Egress Profile...